FEATURES


Design life: 10 year

Robust plate for extended life.

Flame-arresting one-way pressure-relief vent for safety and long life.

Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to99% and freedom from electrolyte maintenance.

Multicell design for economy of installation and maintenance.

Computer designed lead, low Calcium alloy grid for minimal gassing and ease of recycling.

UL-recognized component.

Can be used in upright, side, or end mounting orientation.

Not restricted for air transport –Complies with IATA/ICAO SpecialProvision A67.

Not restricted for surface transport– classified as non-hazardous material as related to DOT-CFRTitle 49 parts 171-189

Not restricted for water transport –classified as non-hazardous material per IMDG Amendment 27

Technical Specifications
AccessoriesInter unit connectors, racks and cabinet systems are available.
Container and cover materialPP (UL94 HB)
Equalization and cycle service charging voltage14.4 to 14.8VDC/unit Average at 77°F (25°C).
Float charging voltage13.65 ±0.15 VDC/unit Average at 77°F (25°C).
Maximum ac ripple (charger)0.5% RMS or 1.5% P-P of float charge voltage recommended for best results. Maximum voltage allowed = 1.4% RMS (4% P-P). Maximum current allowed = 5.10 amperes RMS (C/20).
Operating temperature rangeDischarge: -40°F (-40°C) to +160°F (71°C). Charge: -10°F (-23°C) to +140°F (60°C) (with temperature compensation)
Recommended maximum charging current limitC/5 amperes @ 20 hr. rate.
Recommended operating temperature range+74°F (23°C) to +80°F (27°C).
Self dischargeMPS batteries may be stored for up to 6 months at 77°F (25°C) and then a freshening charge is required. For higher temperatures the time interval will be shorter.
TerminalL-type terminal with 0.28" clearance hole to accept 0.25" (6mm) bolt.

Write a review

Please login or register to review

C&D MPS | Valve Regulated Lead Acid Battery MPS 12-100R